Start your day with a relaxed orientation and site walk at Visitor Pavilion, where a short presentation introduces geodesic principles and the day's safety briefing, followed by coffee on the terrace overlooking the dome field. Then join a guided tour of the construction demonstration area to see a live triangulation demo at Prototype Dome A and try hands-on fastening at the Assembly Practice Bench, giving you practical skills to use in upcoming workshops.
After lunch, head to the hands-on demo area at Field Lab B, where you'll participate in a short workshop on node alignment and membrane fitting using sample panels and quick-release connectors. Then take a guided walk to Observation Deck C for panoramic views of the dome cluster and a sunset discussion on adaptive uses, followed by an introductory troubleshooting session at Tool Shed 2 to practice tightening and sealing techniques before evening refreshments.
As daylight fades, gather for a relaxed debrief and informal Q&A at Community Dome Lounge, where instructors review the day's lessons over locally sourced snacks and warm drinks. Afterwards, join a short twilight lighting demo at Illumination Dome to see practical LED zoning and weatherproofing techniques in action, then wind down with stargazing from Night Patio, where guides relate dome design to celestial geometry and preview tomorrow's hands-on construction session.
Kick off the morning with a hands-on briefing at Design Studio 1, where instructors walk you through dome math using scale models and CAD excerpts, then split into small teams for a rapid prototyping challenge at Modeling Bench Alpha to iterate on panel geometry. After a short coffee break, move to Fabrication Bay North to practice cutting and drilling real struts, test different connector types on a half-frame jig, and finish with a peer review at Instructor Annex to align learnings with yesterday's site observations.
After a working lunch, move to Structural Testing Arena, where teams run load and wind-resistance trials on mid-scale frames and record performance data for design iterations; instructors guide adjustments at the adjacent Connector Calibration Table to optimize joint tolerances. Finish the afternoon with a collaborative membrane-fitting exercise in Seam Workshop Gamma, learning weather-sealing techniques and rapid-install rigging before reconvening to compare results and set goals for the hands-on assembly day tomorrow.
Unwind after a full day of hands-on work with a reflective debrief and skill-sharing circle at Assembly Commons, where teams present short demos of today's prototyping wins and receive targeted feedback from lead builders. Then head to Materials Library Lounge for a guided showcase of alternative panel systems and insulation samples over herbal tea, followed by an optional night shift preview at Prototype Bay D, where instructors demonstrate controlled rivet-setting and temporary bracing techniques under worklights to prepare you for tomorrow's full-scale assembly.
Begin with a guided materials walk-through at Supply Pavilion, where specialists explain the pros and cons of different strut alloys and insulation panels while you handle sample composites. Then move to Cutting & Prep Tent for a hands-on session cutting purlins and marking connection points, followed by practicing jig alignment and temporary bracing on a mid-scale frame at Assembly Platform One to apply lessons from the previous design workshop.
After lunch, move to Fastener Pavilion for a focused clinic on rivet types, torque settings, and corrosion-proofing where you'll test drive pneumatic tools on sample joints. Then head to Assembly Ring Two to join a rotational build station practicing full-panel installs and tarp tensioning, followed by a short diagnostics relay at Quality Bay to compare fit tolerances and prep parts for tomorrow's full-scale dome erection.
As dusk settles, gather for a reflective teardown and skill-share at Repair Canopy, where teams swap lessons learned from the day's panel installs while instructors demonstrate quick field fixes for common joint issues. Follow with a hands-on weatherproofing clinic at Sealant Pavilion, practicing bead application and edge flashing on spare panels, then finish the night with a guided tool-care session at Workbench Row to prep equipment and review tomorrow's full-scale erection plan.
Start the day with a case-study walk at Community Farm Dome, where guides demonstrate scaffold-free ventilation upgrades and show a working hydroponics rack installed inside the dome; you'll inspect performance logs and sample crop yields. Then move to Emergency Shelter Demo Dome for a timed rapid-deploy drill, practicing packing, anchoring and quick-panel swaps while instructors coach on logistics and site selection for real-world relief scenarios.
After a farm-to-dome lunch, join a rotating field seminar at Adaptation Hub, where specialists demonstrate retrofitting techniques for heating, rainwater capture, and passive cooling on full-scale test domes; you'll practice installing a compact heat-exchange vent and route a sample gutter-run. Then move to Community Deployment Plaza to observe a staged pop-up clinic showing rapid-conversion workflows-anchoring, interior zoning, and utility hookups-followed by a facilitated discussion on tailoring those methods to the site types you inspected earlier in the week.
As daylight cools, join an applied-case debrief and community-build at Practice Pavilion East, where instructors and local users demonstrate converting a dome into a pop-up clinic and attendees rotate through station-based setups for power, privacy partitioning, and quick-swap medical shelving. Afterwards, wind down with a policy-and-practice Q&A at Stakeholder Roundhouse, sharing lessons learned from the week's builds and mapping scalable deployment plans while enjoying refreshments and a short projection of site-adaptation scenarios for tomorrow's wrap-up.
Begin with an advanced diagnostics clinic at Precision Lab Sigma, where instructors lead live thermal-imaging assessments and teach you to interpret heat-loss patterns on demo panels before practicing targeted insulation retrofits on a test dome. Next, move to Advanced Rigging Suite for a hands-on session installing tensioned skylight assemblies and dynamic bracing systems, then regroup at Evaluation Corner for a peer-led review that ties today's techniques back to the full-scale erection and site-use scenarios you practiced earlier in the week.
After lunch, rotate through a hands-on microclinic at Thermal Retrofit Bay, where you'll apply advanced insulation layering and test vapor-barrier strategies on demo panels before moving to Precision Fastening Row to practice high-tolerance connector adjustments with torque-read tools. Finish the afternoon with a collaborative troubleshooting sprint at Field Simulation Arena, staging common site failures and documenting step-by-step fixes so teams leave with repeatable checklists for future full-scale builds.
Wind down the week with a reflective demo and hands-on clinic at Solder & Seal Studio, where instructors showcase precision junction repairs and participants practice high-fidelity patching on retired panels. Then regroup in Case Study Theatre for a facilitated capstone session-teams present their final build notes and deployment plans while mentors provide scaling feedback-before closing with a communal toast on the Wrap Plaza to celebrate skills gained and next-step collaboration opportunities.